The Telavox softphone supports four different headsets with call controll: Poly (Plantronics), Jabra (only newer versions with software), EPOS (Sennheiser) and Yealink (currently only for Windows).
You can connect your headset through the Telavox softphone by going to Settings > Telephony & Audio > Audio device.
You can connect your headset through the Telavox softphone by going to Settings > Telephony & Audio > Audio device.
In this view you need to make sure to select your headset in the Audio input and Audio output sections.
In Telephony & Audio, you also need to enable "Use headset controls to answer and hang up call".
Troubleshooting
If you have problems with your headset connected to Telavox, e.g. you cannot hear the caller or vice versa, or you cannot seem to get the headset call controls to work, try out these troubleshooting steps:
- Restart the headset/computer.
- Make sure that your headset is connected to the computer overall and the Telavox softphone (as shown above).
- Make sure the headset is up-to-date by downloadingthe software for it and checking its settings.
- Test the headset with a different device.
If these steps did not help you, please contact our support and inform them of the issue and what you have done.