Fanvil X-Series
Fanvil X1SG
This model is automatically provisioned towards Telavox, which means that no manual configuration is required. This hardware only needs power and a network connection to work properly with the Telavox telephony (provided it is connected to a user/extension).
Provisioning parameters that are supported on Fanvil X1SG:
- Automatic Firmware Upgrade
- Call functionallity
- MWI (Message Waiting Indicator)
- BLF (Busy Lamp Field)
- Timezone
- Language
Fanvil X3SG
This model is automatically provisioned towards Telavox, which means that no manual configuration is required. This hardware only needs power and a network connection to work properly with the Telavox telephony (provided it is connected to a user/extension).
Provisioning parameters that are supported on Fanvil X3SG:
- Automatic Firmware Upgrade
- Call functionallity
- MWI (Message Waiting Indicator)
- BLF (Busy Lamp Field)
- Timezone
- Language
Fanvil X4U-V2
This model is automatically provisioned towards Telavox, which means that no manual configuration is required. This hardware only needs power and a network connection to work properly with the Telavox telephony (provided it is connected to a user/extension).
Provisioning parameters that are supported on Fanvil X4U-V2:
- Automatic Firmware Upgrade
- Call functionallity
- MWI (Message Waiting Indicator)
- BLF (Busy Lamp Field)
- Timezone
- Language
NOTE: There is an issue with this model if it has been produced before 03/01/2023
If your device has firmware 2.12.16.4 or lower, you will have to upgrade it first manually to an “intermediate” firmware and then you will be able to use it
You can download this “intermediate” firmware HERE
Fanvil X6U-V2
This model is automatically provisioned towards Telavox, which means that no manual configuration is required. This hardware only needs power and a network connection to work properly with the Telavox telephony (provided it is connected to a user/extension).
Provisioning parameters that are supported on Fanvil X6U-V2:
- Automatic Firmware Upgrade
- Call functionallity
- MWI (Message Waiting Indicator)
- BLF (Busy Lamp Field)
- Timezone
- Language
NOTE:There is an issue with this model if it has been produced before 03/01/2023
If your device has firmware 2.12.16.4 or lower, you will have to upgrade it first manually to an “intermediate” firmware and then you will be able to use it
You can download this “intermediate” firmware HERE
Fanvil X7A
This model is automatically provisioned towards Telavox, which means that no manual configuration is required. This hardware only needs power and a network connection to work properly with the Telavox telephony (provided it is connected to a user/extension).
Provisioning parameters that are supported on Fanvil X7A:
- Automatic Firmware Upgrade
- Call functionallity
- MWI (Message Waiting Indicator)
- BLF (Busy Lamp Field)
- Timezone
- Language